this is something that strangely doesn't happen automatically on ubuntu
in Ubuntu, just add

send host-name "dapperbox";

to your /etc/dhcp3/dhclient.conf file

you might need to do a

sudo /etc/services/networking restart

On your Mac, you can now do

ssh username@dapperbox

instead of

ssh username@1.2.3.4

1) Install the software

sudo apt-get install sshfs

2) Add fuse to /etc/modules

sudo nano /etc/modules

3) Add yourself to the 'fuse' group, then log out and log in again.

sudo adduser your-username fuse

4) Create a mountpoint and give yourself ownership

sudo mkdir /media/mount-name
sudo chown your-username /media/mount-name

5) Mount the filesystem

sshfs remote-system-name:/remote-folder /media/mount-name

6) Unmount the filesystem

fusermount -u /media/mount-name

Directions lifted from Ubuntu forums and here also.

For myself, I had better results running the following command in the same directory that the file that I mounted resides in...

sudo sshfs user_name@subdomain.strongspace.com: folder_name

Where folder_name is the name of the folder that you are mounting strongspace to.

Edit

/etc/network/interfaces 

and adjust it to your needs (in this example setup I will use the IP address 192.168.0.100):

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# This is a list of hotpluggable network interfaces.
# They will be activated automatically by the hotplug subsystem.
mapping hotplug
        script grep
        map eth0

# The primary network interface
auto eth0
iface eth0 inet static
        address 192.168.0.100
        netmask 255.255.255.0
        network 192.168.0.0
        broadcast 192.168.0.255
        gateway 192.168.0.1

First, install Handbrake:

sudo apt-get install nasm build-essential devscripts fakeroot
mkdir ~/tmp
cd tmp
wget http://apt.cerkinfo.be/pool/main/x264/x264_0.0.20050906-1.diff.gz
wget http://apt.cerkinfo.be/pool/main/x264/x264_0.0.20050906-1.dsc
wget http://apt.cerkinfo.be/pool/main/x264/x264_0.0.20050906.orig.tar.gz
dpkg-source -x x264_0.0.20050906-1.dsc
cd x264-0.0.20050906/
dpkg-buildpackage -rfakeroot
cd ..
sudo dpkg -i *.deb
sudo apt-get install debhelper libgtk2.0-dev jam nasm liba52-dev libavcodec-dev libdvdcss2-dev libdvdread3-dev libfaac-dev libmpeg2-4-dev liblame-dev libmp4v2-dev libogg-dev libsamplerate-dev libvorbis-dev libwxgtk2.6-dev libx264-dev libxvidcore-dev
wget http://handbrake.m0k.org/mirrors/m0k/HandBrake-0.6.2-src.tar.gz
tar -xzvf HandBrake-0.6.2-src.tar.gz
cd HandBrake-0.6.2
jam
sudo cp HBTest /usr/local/bin/handbrake

Next, follow the instructions from the Ubuntu Forums to compile and install MPlayer 2.0 from CVS.


Now we can actually rip the DVD:

cd ~/tmp
handbrake -e xvid -E ac3 -2 -S 1400 -i /dev/cdrom -o MOVIENAME.avi

Finally, split the DVD into two files:

mencoder -ovc copy -oac copy -endpos 700MB -o MOVIENAME.CD1.avi MOVIENAME.avi

The output will finish with something like:

Video stream: 1297.378 kbit/s  (162172 B/s)  size: 638610165 bytes  3937.851 secs  94414 frames

Note the number of seconds (in this case: 3937).

mencoder -ovc copy -oac copy -ss NUMER_OF_SECONDS -o MOVIENAME.CD2.avi MOVIENAME.avi

That's it!

Download the binary installer from Sun.

Make sure the universe and multiverse repositories are enabled.

sudo apt-get install fakeroot java-package java-common

fakeroot make-jpkg --full-name "My Name" --email "me@example.com"

sudo dpkg -i sun-j2re1.5_1.5.0+update05_i386.deb

sudo update-alternatives --config java